Bestseller No. 1
BLAUPUNKT 750W 2-Channel, Full-Range Amplifier (AMP7502)
- Optimized 563-watt RMS and a max output power of 1500 watts, you can give your music a huge boost in power that will have you and your passengers partying
- 750 watt maximum power full-range amplifier Compactly built so this amplifier can fit perfectly into any trunk Blaupunkt 750 Watt Monoblock Amplifier
- Stable at 1 ohm | Remote Subwoofer Level Control Included Highly Efficient Heatsink Design allows for Maximum Reliability & Performance of channel: 2/1 Channel
- Featuring 2-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow. Damping Factor – 150. Max. Output Power
- You’ll have full reign over your amplifier with the built-in user control panel, featuring a bass EQ, and variable adjustment tunings for gain level,
SaleBestseller No. 2
Pioneer GM-A3702 2-Channel Bridgeable Amplifier ,Black/red
- 500 Watts Max Power
- Automatic signal sensing and Turn-On
- Hi-Volt input level control
- Balanced isolator input circuit
Bestseller No. 3
Hifonics ZG-1200.2 Zeus Gamma ZG Series 1,200-Watt Max 2-Channel Class A/B Amp
- 1,200 watts max
- 600 watts x 2 at 2 ohms
- 300 watts x 2 at 4 ohms
- 1,200 watts x 1 at 4 ohms mono bridged
- Frequency response: 10 Hz to 22 kHz
SaleBestseller No. 4
Alpine BBX-T600 600W Max BBX Series 2-ohm Stable 2 Channel Class-A/B Amplifier
- Features: class-a/B 2-ohm stable 2-channel amplifier. Rms power rating: 4 ohms: 50 watts x 2 channel | 2 ohms: 70 watts x 2 channel | 1 ohm: ————n/a———— | bridged, 4 ohms: 140 watts x 1 channel | total power output: 600 watts. Pulse width modulated MOSFET power supply, LED power (green) and protect (red) indicators, soft start turn-on, 2 or mono channel operation, 1 pair of preamp outputs to connect multiple amplifiers, 3-way protection circuitry (Thermal, overload, and speaker short p
Bestseller No. 5
Lanzar 2-Channel High Power MOSFET Amplifier – Slim 800 Watt Bridgeable Mono Stereo 2 Channel Car Audio Amplifier-Crossover Frequency and Bass Boost Control, RCA input,Line Output – Lanzar VCT2010
- 400W RMS / 800W MAX POWER: The Lanzar 800 watt 2 channel high power MOSFET amplifier is perfect for your car stereo entertainment system. It can give 400W x 2 output at 4 ohms or 800W x 1 bridged output at 2 ohms for a high quality audio
- FULL RANGE CROSSOVERS: This product features a low / high pass variable crossover for versatility and precise control by being able to fine tune your music. The speaker / subwoofer terminals are to guarantee high conductivity and minimum signal loss
- MOSFET POWER SUPPLY: This powerful amplifier is equipped with metal oxide semiconductor field-effect transistors to quickly switch from full to non-conduction for high efficiency output
- SHORT CIRCUIT PROTECTION: This 2 ch amp is also equipped with a 2×30 amp maxi type fuse to protect the amplifier and the electrical system of your car from thermal / overload / short circuit conditions
- SLIM SIZE DESIGN: Measuring only 10.63”W x 1.78”H x 7.48”L, this amplifier has a slim size design and comes complete with all required mounting hardware for easy installation
Bestseller No. 6
Pioneer GM-A3702 2-Channel Bridgeable Amplifier
- 500 watts Max power
- Package Dimensions: 30.7 H x 10.9 L x 22.9 W (centimetres)
- Package Weight: 1.692 kilograms
- Country of Origin : China
SaleBestseller No. 7
CRUNCH [email protected],[email protected] BRI
- 2 channels x 1,000 watts @ 2 ohms
- 2 channels x 500 watts @ 4 ohms
- 1 channel x 2,000 watts (mono bridged) @ 4 ohms
- Operates in stereo, bridged mono, or stereo/bridged mono simultaneously
- Variable electronic crossover: 12 dB per octave
SaleBestseller No. 8
BOSS Audio Systems PT1000 2 Channel Car Amplifier – 1000 Watts, Full Range, Class A/B, 2-8 Ohm Stable, Mosfet Power Supply, Bridgeable
- Power – 500 Watts Max x 2 @2-Ohms, 250 Watts Max x 2 @4-Ohms, 1000 Watts Max x 1 Bridged @4 Ohms
- Full Range – With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
- Class A/B Topology – Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
- Mosfet Power Supply – A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
- Variable Gain Control – The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
Bestseller No. 9
Crunch PX 1000.2 Power Amplifier (Class Ab, 2 Channels, 1,000 Watts Max)
- 250 Watts RMS x 2 @ 4 ohms
- 500 Watts RMS x 2 @ 2 ohms
- 1000 Watts RMS x 1 Bridged @ 4 ohm
- Total Peak Power: 1000 Watts
- Speaker-level (high-level) inputs
SaleBestseller No. 10
BOSS Audio Systems R1002 Riot Series Car Stereo Amplifier – 200 High Output, 2 Channel, Class A/B, 2/4 Ohm Stable, Low/High Level Inputs, Full Range, Use With Subwoofer
- Power – 100 Max x 2 @ 2 Ohms, 50 Max x 2 @ 4 Ohms
- Full Range – With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
- Low & High Level Inputs – A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers
- Variable Input Gain Control – The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- Class A/B Topology – Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
Last update on 2023-05-25 / Affiliate links / Images from Amazon Product Advertising API
